finite element
英 [ˈfaɪnaɪt ˈelɪmənt]
美 [ˈfaɪnaɪt ˈelɪmənt]
有限元
双语例句
- A definite inner structure in finite element permutation is considered in this paper.
文章研究了有限元排列一种确定的内部结构。 - Finite element equations to calculate current and temperature fields of aluminum reduction cells are deduced using Galerkin method.
采用加权余量的伽辽金法推导了铝电解槽电、热场计算的有限元方程。 - It is significant to study the contact area in rolling process and simplify model of finite element.
对研究花键冷滚压成形过程中的接触面积和有限元模型的简化具有重要的意义。 - The modeling and calculation of a barrel-stave flextensional transducer is presented based on the finite element method.
用有限元法对凹桶型弯张换能器进行了建模与分析计算。 - Thermal effects of piezoelectric intelligent plate are studied by finite element method.
通过有限元分析方法研究了压电智能板结构的热效应问题。 - Dynamic response of viscoelasticity structure is analyzed based on nearly incompressible finite element method.
采用近似不可压缩有限元方法，分析了粘弹性结构的动力响应。 - A general contact algorithm for parallel finite element simulation of dynamic contact problem is presented in this paper.
针对动态接触问题的有限元并行计算，提出了一种新的接触算法。 - Program is implemented and a instance is given to show the programming of finite element method.
据此编制了有限元分析的数值计算程序，并给出了一个实例。 - Finite element method is used to simulating the high pressure gas quenching.
用有限元技术对气体淬火工艺进行了模拟。 - The whole process simulation analysis of Sanglang RCC arch dam is done with3D finite element method ( FEM).
利用三维有限元法，对桑郎碾压混凝土拱坝进行了全过程仿真分析。 - In this paper, a finite element method for linear scalar conservation laws is analyzed.
研究了一维线性标量守恒律初边值问题的弱解，分析了有限元方法的收敛性。 - A three-dimensional finite element dynamical analysis model of a frame-supported wall-beam is established by the finite element procedure.
以框支墙梁为研究对象，利用大型通用有限元程序，建立了其三维有限元动力计算模型。 - A modified node connection method is put forward to overcome the difficulty in automatic finite element mesh generation.
文中提出了一种改进的结点连接法，解决了传统结点连接法中自动生成有限元网格结点的困难。 - Computed results was compared with experimental ones, the validity of the finite element mode was verified.
通过比较计算模态和试验模态，验证了车身结构有限元模型的正确性； - A rational method of disposal for a the dowel bar is proposed through test-in-place and finite element analysis.
提出了传力杆的合理布置方式，并通过现场试验和数值模拟进行了分析和验证。 - A finite element model for motorcycle frame is built with its strength and stiffness analyzed.
首先建立了车架有限元模型，对其强度和刚度进行了分析； - By an example, it shows that equivalent method is reliable and practical in the finite element analysis.
通过一个具体的算例，证明了在有限元分析中等效方法的合理性和正确性。 - The basic idea of the finite element beam propagation method ( FE-BPM) is described.
文中概述了有限元束传播方法的基本思想和方法。 - A two-dimensional axisymmetric finite element model of sampling tube and sediments is built.
建立了取样管与沉积物接触的二维轴对称有限元模型。 - Then, for fatigue strength analysis, local finite element models of the tubular joints are also formed.
其次，建立了管节点结构局部有限元模型进行疲劳强度分析。 - A static finite element model of an air spring was given.
文中建立了空气弹簧的静态有限元模型。 - The nonlinear analysis of pre-stressed concrete beams has been made by using layered finite element method in this paper.
采用分层法对预应力混凝土梁进行了非线性有限元分析。 - Based on rigid-plastic finite element method, backward extrusion process of TB10 titanium alloy cylinder was simulated numerically.
基于刚塑性有限元法，对TB10钛合金筒体反挤压过程进行数值模拟。 - A limit-restraint method is proposed based on modifying the finite element inverse approach.
基于对有限元逆算法的改进，提出了极限约束法。 - This provides a good grounding in computer modelling and in the finite element method, in particular.
这提供了一个计算机模型，在良好的基础，特别是在有限元方法。 - So it will markedly increase the efficiency of finite element analysis and optimization of the tooth profile.
显著地提高了对齿形进行有限元分析和优化的效率。 - In this paper, the finite element method for this nonlinear model is given.
本文研究这一模型的非线性有限元法。 - This article mainly introduces some similarities and differences between finite volume method and finite element method.
本文主要介绍有限体积法和有限元法之间的一些相同点和不同点。 - Nonlinear electric field transient finite element equation is performed based on the backward Euler method and the Variational principle.
基于后退欧拉法和变分原理推导了非线性电场的暂态有限元方程。 - The non-linear problems were solved through the finite element analysis to design the film stress model.
本文中运用有限元分析方法，设计了应力片模型，有效地改善了电容式压力传感器中的非线性问题。